Features & Advantages of lightweight aac wall floor panel
1. Lightweight: Aerated concrete density is usually 400-900 kg/m3(according to the market),
which is 1/3 of clay block and 1/5 of common concrete.
2. Fireproof: Most of the major raw materials is inorganic materials, so it has good fire resistance,
and do not emit harmful gases when meet fire
3. Sound insulation: As the material inside has a large numbers of the pores and porous, which
has a good thermal insulation properties.
4. Thermal Insulation: Thermal conductivity is 0.9-0.22 W/(MK), which is 1/4 of clay bricks.
5. Anti-seismic: It can improve the two seismic than the brick level.
Application
The hoist (Refer to the picture) is the back-up equipment for autoclaved aerated concrete cutting machine. It is installed on the automatic billet shift machine and the lifting is controlled by the guide frame. It is an ideal choice for finished concrete transportation, featured of stability, positioning-accuracy and no sway.
Structure
The clamp is composed of a horizon beam, a vertical beam, a guide frame, a guide device, clamp device, a lifting unit and cylinder system. The two beams are made of huge steel pipes, so it is featured of good stiffness, compact structure and it can be easily installed and debug. Lifting device is located on the horizon beam and the guide unit is fixed on the vertical beam.
Working principle
The clamp can be moved, lifted, clamped and released.
move
It can be moved axially.
Lifting
When pulley is hung by hanger, guiding device will move along the guiding frame and then the hoist will go up and down.
Clamp and release
The hydraulic station supplies oil to the cylinder to make the clamping device rotate, the cylinder contracts to clamp, and elongate to release.
When the cylinder contracts and is in a clamped state, the spreader is lifted, so the finished product can be lifted.
Technical parameter:
| Size(Maximum): |
| Length | 6740 | mm |
| Width | 2570 | mm |
| Height | depends on the stroke |
| Weight | 5621 | kg |
| Cylinder |
| Diameter | 80 |
| Stroke | 150 |
Maintenance and repair
Maintenance
Pleas make sure that the cylinder system is maintained according to its operation manual.
Please remove the dust on the piston rod after work with cotton cloths and make sure it is reset.
To clean up the clamp unit, lifting device, guide unit and make sure that there is no waste left.
Repair
Please check all fasteners to avoid any possible loose and change worn parts.
Product Tags:
|
|
W2570mm 380V Hoist AAC Block Making Machine For Finished Concrete Images
|
